specification control drawing duraseal is a trademark of ty co electronics corporation. = tyco electronics corporation 300 constitution drive, menlo park, ca. 94025, u.s.a. raychem title: duraseal bullet terminal unless otherwise specified dimensions are in millimeters. [inches dimensions are shown in brackets] document no.: b-106-7xxx tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics reserv es the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. rev.: a date: 17-jul-06 drawn by: m. foronda cage code: 06090 replaces: d030374 dcr number: d060180 scale: --- size: a sheet: 1 of 1 ? 2006 tyco electronics corporation. all rights reserved. if this document is printed it becomes unc ontrolled. check for the latest revision. product dimensions wire dimensions ?g product name ?a min b nom l max color (1) size range mm 2 (awg) min max b-106-7401 4.0 [0.160] 4.0 [0.160] 33.0 [1.300] red 0.5 - 1.0 (awg 22-18) 1.4 [0.055) 4.0 [0.160] B-106-7502 4.6 [0.180] 5.0 [0.197] 34.0 [1.339] blue 1.5 - 2.5 (awg 16-14) 2.0 [0.080) 4.6 [0.180] materials 1. insulation sleeve: heat-shrinkable, transparent color (1), radiation cross-linked modified polyamide with thermoplastic adhesive coating inside. 2. bullet terminal: tin-plated brass. base metal: c260 brass. plating: tin-plated per astm b545, class a. application 1. these controlled crimp devices are desi gned to terminate a tin-plated or bare c opper stranded wire having an insulation rate d for at least 75 c to a bullet terminal. it will provide a splash proof and strain relief connection. ul listed wire connector 91j4. 2. temperature range: -55 c to +125 c. 3. for application tooling and installation, see rpip-684-00. for best results, prepare the wire as shown:
|
